Abstract
Carbothermal production has been recognized as conceptually the simplest and cleanest route to magnesium metal, but has suffered from technical challenges of development and scale-up. Work by CSIRO has now successfully demonstrated the technology using supersonic quenching of magnesium vapor (the MagSonic™ Process). Key barriers to process development have been overcome: the experimental program has achieved sustained operation, no nozzle blockage, minimal reversion, and safe handling of pyrophoric powders. The laboratory equipment has been operated at industrially relevant magnesium vapor concentrations (>25% Mg) for multiple runs with no blockage. Novel computational fluid dynamics (CFD) modeling of the shock quenching and metal vapor condensation has informed nozzle design and is supported by experimental data. Reversion below 10% has been demonstrated, and magnesium successfully purified (>99.9%) from the collected powder. Safe operating procedures have been developed and demonstrated, minimizing the risk of powder explosion. The MagSonic™ Process is now ready to progress to significantly larger scale and continuous operation.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Abbott, T., Why Choose Magnesium? in 4th International Light Metals Technology Conference (LMT 2009). 2009. Gold Coast, AUSTRALIA: Trans Tech Publications Ltd.
Hansgirg, F., Production of Metallic Magnesium. 1932, US1884993.
Dungan, T. A., Production of Magnesium by the Carbothermic Process at Permanente. in Transactions of the American Institute of Mining and Metallurgical Engineers. 1944:(308–314).
Byrns, A. C., Carbothermic Process for Magnesium at Permanente. Chemical Engineering Progress, 1947. 43(4): p. 172–173.
Dean, K. C., Edlund, V. E., and Lawrence, A. G., Quenching Carbothermic Magnesium with Nitrogen. Light Metal Age, 1972. 30(5–6): p. 21–22.
Avery, J. M., Process for Recovering Magnesium. 1983, EP75836-A.
Avery, J. M., Method for Producing Magnesium. 1981, US4290804.
Eckert, C. A., Irwin, R. B., and Graves, C. W., Liquid Metal Solvent Selection: The MgO Reduction Reaction. Industrial & Engineering Chemistry, Process Design and Development, 1984. 23(2): p. 210–217.
Brooks, G., Trang, S., Witt, P., Khan, M. N. H., and Nagle, M., The Carbothermic Route to Magnesium. JOM, 2006. 58(5): p. 51–55.
Brooks, G., Nagle, M., Tassios, S., and Trang, S., The Physical Chemistry of the Carbothermic Route to Magnesium. in Magnesium Technology 2006. 2006. San Antonio, TX, United States: Minerals, Metals and Materials Society, Warrendale, PA 15086, United States (25–31).
Tassios, S., Barton, T. R. D., Constanti-Carey, K. K., Nagle, M. W., and Prentice, L. H., Manufacture of Metal E.G. Magnesium, Involves Performing Carbothermal Reduction of Metal Oxide, Preventing Reformation of Metal Oxide, and Cooling Stream Using Nozzle Heated with Unit Other Than Gas under Specific Condition. 2010, WO2010012042-A1.
Donaldson, A. and Cordes, R. A., Rapid Plasma Quenching for the Production of Ultrafine Metal and Ceramic Powders. JOM, 2005. 57(4): p. 58–63.
Prentice, L., Nagle, M., and Constanti-Carey, K., Impurities in the Carbothermal Production of Magnesium: To 1500 °C. in High Temperature Processing Symposium. 2009. Swinburne University, Hawthorn, Australia.
Prentice, L. and Nagle, M., Mechanism and Kinetics of Reduction of Magnesium Oxide with Carbon. in Magnesium Technology 2009. 2009. San Francisco, CA: The Minerals, Metals, and Materials Society (35–39).
Prentice, L. H., Psuedo-Steady-State Control of High Temperature Gas-Solid Reaction. in Chemeca2011. 2011. Sydney, Australia: Engineers Australia.
Bohnet, M. and Lorenz, T., Separation Efficiency and Pressure Drop of Cyclones at High Temperatures, in Gas Cleaning at High Temperatures, R. Clift and J.P.K. Seville, Editors. 1993, Blackie Academic and Professional: London, UK. p. 17–31.
Bohnet, M., Influence of the Gas Temperature on the Separation Efficiency of Aerocyclones. Chemical Engineering and Processing, 1995. 34(3): p. 151–156.
Prentice, L., Wai Poi, N., and Haque, N., Life Cycle Assessment of Carbothermal Production of Magnesium in Australia, in IMA 67th Annual World Magnesium Conference. 2010, International Magnesium Association: Hong Kong, PRC. p. 77–82.
Prentice, L. H., A Kinetic Model for the Carbothermal Production of Magnesium. 2009, CSIRO Process Science and Engineering: Clayton, VIC (Internal Report).
Permanente Squeaks Through, in Time. February 8, 1943.
Yuasa, S., Kawashima, M., and Sakurai, T., Spontaneous Ignition of Ultra-Fine Magnesium Powder without an Original Oxide Coat at Room Temperature in O 2 /N 2 Mixture Streams. Proceedings of the Combustion Institute, 2009. 32(2): p. 1929–1936.
National Fire Protection Authority, NFPA 69 — Standard on Explosion Prevention Systems, 2008 Edition. 2007, NFPA: Quincy, MA.
National Fire Protection Authority, NFPA 484 -Standard for Combustible Metals, 2009 Edition. 2008, NFPA.
Revel, G., Pastol, J.-L., Rouchard, J.-C., and Fromageau, R., Purification of Magnesium by Vacuum Distillation. Metallurgical Transactions B, 1978. 9B(December): p. 665–672.
Hideo, T., Noboru, K., Gotou, T., Akiyoshi, K., and Yuuji, K., Manufacture of Metallic Magnesium. 1979, JP54130413.
Odle, R. R. and McClaine, A. W., Economic Evaluation of a Nozzle-Based Carbothermal Magnesium Process. 2007, Metallurgical Viability Inc: Elkton, MD.
Hori, F., Apparatus for Obtaining Mg and Ca through Carbon Reduction. 1980, US4200264.
Hori, F., Method for Obtaining Mg and Ca through Carbon Reduction. 1979, US4147534.
Engell, J., Frederiksen, J., and Nielsen, K. A., Method of Producing Metallic Magnesium, Magnesium Oxide, or a Refractory Material. 1998, US5803947.
Warren, G. F. and Cameron, A. M., Process for Producing Magnesium. 1985, EP0146986.
Cameron, A. M., Lotens, J. P., Ouwehand, C., and Aurich, V. G., Carbothermic Production of Magnesium, in Pyrometallurgy ‘87. 1987, The Institution of Mining and Metallurgy: London, UK. p. 195–222.
Hong, L., Sohn, H. Y., and Sano, M., Kinetics of Carbothermic Reduction of Magnesia and Zinc Oxide by Thermogravimetric Analysis Technique. Scandinavian Journal of Metallurgy, 2003. 32(3): p. 171–176.
Li, R., Wei, P., and Sano, M., Kinetics and Mechanism of Carbothermic Reduction of Magnesia. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2003. 34(4): p. 433–437.
Nusheh, M., Yoozbashizadeh, H., Askari, M., Kuwata, N., Kawamura, J., Kano, J., Saito, F., Kobatake, H., and Fukuyama, H., Effect of Mechanical Milling on Carbothermic Reduction of Magnesia. ISIJ International, 2010. 50(5): p. 668–672.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Prentice, L.H. et al. (2012). Carbothermal Production of Magnesium: Csiro’s Magsonic™ Process. In: Mathaudhu, S.N., Sillekens, W.H., Neelameggham, N.R., Hort, N. (eds) Magnesium Technology 2012. Springer, Cham. https://doi.org/10.1007/978-3-319-48203-3_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-48203-3_6
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48571-3
Online ISBN: 978-3-319-48203-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)