Content-Length: 18156 | pFad | http://www.ospo.noaa.gov/data/messages/2023/07/MSG_20230728_1554.html

Update #5: Engineering continued instrument science data activation activities for S-NPP. As of Friday, July 28, 2023, VIIRS SDR products are approved for operational use. Direct Broadcast (DB) users can use the equivalent Community Satellite Processing Package (CSPP) LEO products for operations. However, Cal/Val teams and PALs are continuing their analysis on VIIRS EDR products. NDE/PDA subscriptions for all VIIRS science products are expected to be enabled early next week. 


The OMPS SDR and EDR teams will evaluate OMPS Limb Profile (LP), Nadir Profile (NP), and Nadir Mapper (NM) product quality after the OMPS SDR Look Up Tables (LUTs) are ingested into operations mid next week. 


The CrIS instrument is showing nominal recovery, but Cal/Val teams will still need to conduct more analysis before all CrIS science products can be approved for operational use.


Update #4: Engineering continued instrument science data activation activities for S-NPP. 


As of Thursday, July 27, 2023, VIIRS was placed in full operational mode at ~16:50 UTC. CrIS was placed in full operational mode at ~19:36 UTC. Cal/Val teams are focusing their analysis on observed data following this timeline. This science data will be available through GRAVITE, NCCF, CLASS and NDE I&T through which the Cal/Val teams and PALs can perform their full analysis.


S-NPP Tropical Cyclone Products (NTCP) and Blended hydro have been approved for operational use and NDE/PDA subscriptions for those products were enabled at 15:30 UTC. 


Full product recovery is expected to require approximately 1 week. S-NPP VIIRS, CrIS, OMPS product subscriptions on PDA OPS will be enabled as each product is cleared for operations by the Cal/Val teams and Product Area Leads (PAL) and approved by OSPO’s Satellite Products and Services Division (SPSD). OSPO will issue an ESPC Notification prior to distributing the product on PDA OPS. At that point CSPP LEO users can use the equivalent CSPP product for operations.


Update #3: As of Thursday, July 27, 2023, the ATMS SDR, TDR, and Microwave Integrated Retrieval System (MiRS) EDR products are approved for operational use and NDE/PDA subscriptions for those products will be enabled at 15:30 UTC, July 27, 2023. As of 15:30 UTC, the S-NPP CERES instrument has also returned to operational status. Direct Broadcast (DB) users can use the equivalent Community Satellite Processing Package (CSPP) LEO products for operations.

Update #2: Engineering commenced instrument science data activation activities today and will continue through the next few days. The S-NPP spacecraft remains power positive and all communications elements are functional.


ATMS was placed in operational mode at 20:14:13 UTC. CERES was placed in operational mode at ~20:30 UTC. OMPS was placed in operational mode at 23:15 UTC. VIIRS and CrIS will be activated over the next two days.  Cal/Val teams are focusing their analysis on observed data following this timeline. 


Full product recovery is expected to require approximately 1 week. This science data will be available through GRAVITE, NCCF, CLASS and NDE I&T through which the Cal/Val teams and PALs can perform their full analysis. Although the HRD transmitter remains on, Direct Broadcast (DB) users are advised that science data is not available.  

PDA OPS subscriptions for all S-NPP science products have been disabled. S-NPP science product subscriptions will be activated for distribution through PDA OPS after each product is cleared for operations by the product recovery team. TLEs and Rev-num files for S-NPP will still be distributed as they are made available. Users who have any questions may directly contact OSPO’s JPSS Data Operations Manager at henok.amenu@noaa.gov and include the ESPC Help Desk on the cc line (ESPCOperations@noaa.gov). 


Update #1: After further investigation, the SNPP spacecraft entered a non-nominal state at ~02:03:22 UTC on Jul 26, 2023. S-NPP is in Mission Point mode and all instruments are currently in a safe mode state. Engineering will continue to restore all instruments and science data. Although the HRD transmitter remains on, Direct Broadcast (DB) users are advised that science data is not available. 

 

All missed data will not be recoverable.  No data is available starting at 01:56:11 UTC, July 26, 2023 (Rev #60846).

The NOAA-20 spacecraft (the primary satellite) will continue to provide all the primary JPSS science data needs. Users are advised that when instruments are recovered, products will not be available from PDA until the products are checked out by the instrument and calibration and validation teams.  Users who have any questions may directly contact OSPO’s JPSS Data Operations Manager at henok.amenu@noaa.gov and include the ESPC Help Desk on the cc line (ESPCOperations@noaa.gov).  

Topic:  SNPP data outage/delay, SVL Rev 60847

Date/Time Issued:  July 28, 2023  1554Z

Product(s) or Data Impacted:  All SNPP products

Date/Time of Initial Impact:
  July 26, 2023 0336Z

Date/Time of Expected End:  TBD

Length of Outage: TBD

Details/Specifics of Change:  SVL Rev 60847 no TLM/Data was received.  Data will be recovered on the next rev 60848.

Contact Information for Further  Information: ESPC Operations at ESPCOperations@noaa.gov and 301-817-3880.    


Web Site(s) for Applicable Information: N/A

This message was sent by ESPC.Notification@noaa.gov. You have been sent this and other notifications because you have opted in to receive it. If for any reason, you wish to unsubscribe, please contact ESPC Help Desk at ESPCOperations@noaa.gov or (301) 817-3880. Please note: it may take up to two business days to process your unsubscribe request.








ApplySandwichStrip

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier!      Saves Data!


--- a PPN by Garber Painting Akron. With Image Size Reduction included!

Fetched URL: http://www.ospo.noaa.gov/data/messages/2023/07/MSG_20230728_1554.html

Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy